Mercedes S-Class W-220
since 1998 release
Repair and operation of the car
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
- Power shafts
+ Power shafts
Dismantling and assembly of differential
Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels
Determination of thickness of adjusting laying and its installation in the reducer case
Check and adjustment of a gap of a flange
Dismantling and assembly of differential with automatic blocking
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
+ Schemes of electric equipment
Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheelsDismantling and assembly of a reducer of the main transfer
Assembly and adjustment
The friction moment in the bearing of the leading gear wheel (new conic roller bearings): 215-245 N · m.
Tolerance from adjusting parameter on the end of the leading gear wheel:-0.02/mm.
Gap between the leader and the main transfer conducted by gear wheels: 0.08 - 0.014 mm.
Axial gap between a flange and the case of differential: 0.03 - 0.3 mm.