Mercedes S-Class W-220

since 1998 release

Repair and operation of the car



Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      The angles of installation of wheels of the car - the general information
      Conditions of check of angles of installation of wheels
      Adjustment of forward wheels
      Adjustment of back wheels
      Check of clearance of a body of the car
      Removal and installation of the steering mechanism
      Pump of the amplifier of steering
      Dismantling and assembly of the pump of the amplifier of steering
      Dismantling and assembly of an electronic and adjustable steering column
      Removal and installation of the lower steering shaft
      Removal and installation of the drive for telescopic adjustment of a steering column
      Removal and installation of an emphasis of a pipe
      Dismantling and assembly of an internal pipe
      Installation of the top arm of fastening of a pipe
      Removal and installation of the blocking cylinder
      Contact spring
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment








8aff535e


Conditions of check of angles of installation of wheels

Check of angles of installation of the car demands existence of a viewing ditch or the special measuring elevator. When carrying out measurement it is necessary to satisfy the following conditions:

- Air pressure in tires corresponds to set.
- Forward wheels are put directly.
- The car is not loaded, the fuel tank is completely filled.
- Suspension brackets of the car were with an osazhena force.
- Steering is adjusted.
- Side plays in connections of steering drafts lie within admissible.
- Side plays in connections of a suspension bracket lie within admissible.
- Depth of the drawing of a protector of tires of one axis is identical.